序号 | 论文题目 | 作者及排序 | 期刊名称 | 年，卷（期）：起止页 |
1 | Effect of Cathode Feed Mode on Electrochemical Machining of Diamond Hole | 何亚峰/1 | International Journal of Electrochemical Science | 2019,14:11651-11662 |
2 | Electrochemical Machining of Titanium Alloy Based on NaCl Electrolyte Solution | 何亚峰/1 | International Journal of Electrochemical Science | 2018, 5736-5747 |
3 | The Electrochemical Dissolution Behavior Research of Titanium Alloy under Different Electrolyte | 何亚峰/1 | Procedia CIRP | 2018,68:757-762 |
4 | Polarization of Ti6Al4V alloy in NaBr electrolyte and surface fractal analysis | 何亚峰/1 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS | 2018,232:602-609 |
5 | Experimental research on the optimization of precision electrochemical machining feed mode of diamond-hole grille | 何亚峰/5 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017,91:147-153. |
6 | Experimental research on improving accuracy of electrochemical machining of deep narrow grooves | 何亚峰/5 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018,96:3217-3225 |
7 | Electrochemical machining of deep narrow slits on TB6 titanium alloys | 何亚峰/6 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017,92:3063-3071 |
8 | Experimental research on process stability in pulsed electrochemical machining of deep narrow grooves with high length-width ratio | 何亚峰/7 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018,96:2245-2256 |
9 | 菱形孔电解加工数值模拟及试验研究 | 何亚峰/1 | 电加工与模具 | 2019,03:37-41 |
10 | 阶梯孔数控电解镗孔加工的阴极设计及试验研究 | 徐波/1 | 中国机械工程 | 2019,30(12):1498-1506 |
11 | 五轴数控电解开槽加工整体涡轮盘的工艺试验研究 | 干为民/1 | 制造技术与机床 | 2017,02:37-42 |
12 | 电解复合加工研究进展 | 干为民/1 | 常州工学院学报 | 2018,01:20-26 |
13 | 基于铜基聚氨酯复合抛光阴极的电解机械复合抛光试验研究 | 干为民/2 | 制造业自动化 | 2019,01:108-111 |
14 | 管电极电解加工三角孔实验研究 | 干为民/2 | 电加工与模具 | 2018,02:35-38 |
15 | 六边形型孔电解加工试验及工艺优化 | 尹飞鸿/1 | 制造业自动化 | 2018,02:60-64 |
16 | 电解加工新工艺及发展趋势 | 尹飞鸿/1 | 机械设计与制造工程 | 2018,01:13-17 |
17 | 刀具安装误差对面齿轮齿廓曲面影响分析 | 李晓贞/1 | 机械传动 | 2019,42(1):117-120 |
18 | 激光温喷丸对铝合金焊接接头表面残余应力的影响 | 苏纯/1 | 应用激光 | 2018,38(5):794-797 |
19 | 激光温喷丸诱导的铝合金焊接接头表面残余应力稳定性研究 | 苏纯/1 | 热加工工艺 | 2018,47(21):39-42,48 |
20 | TGK500-3000深孔镗滚数控机床设计及主参数确定 | 徐红丽/1 | 机床与液压 | 2018, 46 (466) 21-23, 15 |
21 | 主轴弹性对摩擦提升系统纵向振动特性影响的研究 | 刘义/1 | 机械科学与技术 | 2017,36(4):547-552 |
22 | Study on the residual stresses distribution in thick prestretched aluminum plate | 郭魂/1 | Key Engineering Materials | V764 p49-57 （2018） |
23 | CFD Simulation and Test of a High Pressure Piston Pump with Pre-Compression Chamber Structure | 吴小锋/1 | Journal of the Chinese Society of Mechanical Engineers | 2019,40(1):pp1-10 |
24 | Flow ripple analysis and structural parametric design for apiston pump | 吴小锋/1 | Journal of Mechanical Science and Technology, | 2017,vol31(9):p4245-4254 |
25 | 轴向柱塞泵多学科融合建模与集成优 | 吴小锋/1 | 航空动力学报 | 2018，33(5)：1245-1255 |
26 | Modeling and simulation of dynamics of a planar-motionrigid body with friction and surface contact | 王晓军/1 | Modern Physics Letters B | 2017, 31 (16-19) 174402 |
27 | A method for dynamic modeling and simulation of the translational joint with clearance and LuGre friction | 王晓军/1 | Modern Physics Letters B | 2018， Vol. 32, Nos. 34–36 :1840118 |
28 | 含摩擦滑移铰平面多刚体系统动力学的数值算法 | 王晓军/1 | 力学学报 | 2019,51(1):209-217 |
29 | Investigation on stresses of superconductors under pulsedmagnetic fields based on multiphysics model | 杨小斌/1 | Physica C: Superconductivity and its applications | 2017, 535:1-7. |
30 | Preparation and Properties of Plasma Sprayed NiCr Spinel Infrared Radiation Ceramic Coatings | 李丹虹/1 | Science of Advanced Materials, | 2019,11(4):476-482 |
31 | A Method of Parametric Stability Region Determination for Non-linear Gear Transmission System | 盛冬平/1 | Mechanisms and Machine Science, | 2020(77):560-569 |
32 | Numerical Simulation of Hose Whip Phenomenon in Hose-Drogue Aerial Refueling | 陈乐乐/1 | Advances in Applied Mathematics and Mechanics | 2018,10(3):517-528 |
33 | CMM Based Volumetric Assessment Methodology for Polyethylene Tibial Knee Inserts in Total Knee Replacement | 江炜/1 | Applied Bionics and Biomechanics | 2018, 1-6 |
34 | Comparison of CMM and Micro-CT Volumetric Analysis of Polyethylene Tibial Knee Inserts in Total Knee Replacement | 江炜/1 | International Journal of Polymer Science | 2018, 1-7 |
35 | Enhancement of the red emission in Ba3(PO4)2:Eu3+ by addition of charge compensator Na+ | 张丹丹/1 | Modern Physics Letters B | 2018,32:1840063 |
36 | 基于ESO与NTSM的汽车主动前轮转向控制 | 桑楠/1 | 南京航空航天大学学报 | 2018, 50(04): 521- 527. |
37 | 汽车主动前轮转向与直接横摆力矩协调控 | 桑楠/1 | 南京理工大学学报 | 2018, 42(06): 655-661. |
38 | 注塑模具弧形抽芯机构的创新设计 | 沈洪雷/1 | 机械设计与研究 | 2017,33(3):18-20 |
39 | 注射压缩工艺参数对厚壁塑件成形质量的影响 | 沈洪雷/1 | 机床与液压 | 2018,46(4):9-12 |
40 | 基于共形几何代数的6-DOF机器人运动学逆解 | 冯春/1 | 机械设计与研究 | 2018,34(1):69-75 |
41 | 塑料斜齿轮成型差动旋转脱模机构的创新设计 | 江昌勇/1 | 机械设计与制造 | 2018(4):30-32 |
42 | 基于RGB-D相机的球体三维重建及定位方法研究 | 冯春/1 | 机电工程 | 2019,36(5)：549-554 |
43 | 6自由度关节机器人运动学反解的共形几何代数方法 | 冯春/1 | 机械科学与技术 | 2017,36(8):1198-1204 |